CLEARANCE WARNING BUZZER REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    1. Remove the instrument panel safety pad sub-assembly (Click here).

  4. REMOVE NO. 1 CLEARANCE WARNING BUZZER

    E212135

    1. Detach the clamp and remove the No. 1 clearance warning buzzer.

    2. Disconnect the connector.