YAW RATE AND ACCELERATION SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note

While the auxiliary battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing brake system components, do not depress the brake pedal or open/close the doors while the auxiliary battery is connected.

PROCEDURE


  1. REMOVE HV BATTERY

    Click here

  2. REMOVE YAW RATE AND ACCELERATION SENSOR


    1. A005DMR

      Disconnect the connector from the yaw rate and acceleration sensor.

    2. Remove the 2 bolts and yaw rate and acceleration sensor.