AMPLIFIER ANTENNA INSTALLATION

PROCEDURE

1. INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY

   
   

   1. 

      Attach the claws to install the No. 1 amplifier antenna assembly.

   2. 

      Install in this Direction

      w/o Telematics System

      
      

      1. Install the nut.

         Torque:

         4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      2. Attach the clamp and connect the connector.

   3. 

      Install in this Direction

      w/ Telematics System

      
      

      1. Install the nut.

         Torque:

         4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      2. Attach the clamp and connect the connectors.

2. INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY

   Click here

3. INSTALL ROOF HEADLINING ASSEMBLY

   
   

   1. for Single Cab:

      Click here

   2. for Smart Cab:

      Click here

   3. for Double Cab:

      Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.