CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. B0084B8

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

      Note

      If the camshaft position sensor has been struck or dropped, replace it.

  3. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  4. REMOVE FUEL HOSE BRACKET


    1. B0087MB

      Remove the engine cover joint and fuel hose bracket from the EGR valve bracket.

  5. DISCONNECT ENGINE WIRE

    Click here

  6. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)


    1. B00864A

      Disconnect the camshaft position sensor connector.

    2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

      Note

      If the camshaft position sensor has been struck or dropped, replace it.