HEATED STEERING WHEEL CONTROLLER(w/o Lane Departure Alert System) REMOVAL

PROCEDURE


  1. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

    Click here

  2. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY


    1. B004E11

      Disconnect the connector.

    2. B004ES7

      Disengage the 4 claws of the lower steering wheel boss cover.

      Note

      If the heater thermistor comes off the lower steering wheel cover, replace the steering wheel assembly.

      B004GOAC02
      *1 Heater Thermistor

      Tech Tips

      Do not remove the lower steering wheel boss cover from the steering wheel sub-assembly. Loosen the lower steering boss cover.

    3. B004E1N

      Disengage the clamp.

    4. Remove the 2 screws and steering wheel heater control assembly from the lower steering wheel boss cover.