THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

   
   

   1. Install a new gasket on the water inlet with thermostat sub-assembly.

   2. Type A:

      
      

      1. Install a new gasket to the water inlet with thermostat sub-assembly.

      2. Install the water inlet with thermostat sub-assembly with the 2 nuts and bolt.

         Torque:

         10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Type B:

      
      

      1. Install a new gasket to the water inlet with thermostat sub-assembly.

      2. Install the water inlet with thermostat sub-assembly with the 3 bolts.

         Torque:

         10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   4. Connect the No. 2 radiator hose and No. 3 water by-pass hose.

2. ADD COOLANT (for Engine)

   Click here

3. INSPECT FOR COOLANT LEAK (for Engine)

   Click here

4. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

   Click here

5. INSTALL INLET AIR CLEANER ASSEMBLY

   Click here