SEAT BELT WARNING LIGHT(for Rear) INSPECTION

PROCEDURE

  1. INSPECT TELLTALE LIGHT ASSEMBLY

    1. B366462E02

      w/o Rear No. 2 Seat:

      1. Inspect the indicator operation.

        Apply battery voltage to the telltale light assembly connector, and check that the telltale light assembly indicator illuminates.

        OK

        Measurement Condition

        Specified Condition

        Battery positive (+) → Terminal 4 (B)

        Battery negative (-) → Terminal 8 (RCID)

        Rear No. 1 center seat indicator illuminates

        Battery positive (+) → Terminal 4 (B)

        Battery negative (-) → Terminal 9 (RRID)

        Rear No. 1 seat RH indicator illuminates

        Battery positive (+) → Terminal 4 (B)

        Battery negative (-) → Terminal 18 (RLID)

        Rear No. 1 seat LH indicator illuminates
        Table 1. Text in Illustration

        *a

        Component without harness connected

        (Telltale Light Assembly)

        *b

        Rear No. 1 seat RH indicator

        *c

        Rear No. 1 center seat indicator

        *d

        Rear No. 1 seat LH indicator

        If the result is not as specified, replace the telltale light assembly.

      2. Inspect the illumination operation.

        Apply battery voltage to the telltale light assembly connector, and check that the telltale light assembly illuminates.

        OK

        Measurement Condition

        Specified Condition

        Battery positive (+) → Terminal 6 (ILL+)

        Battery negative (-) → Terminal 15 (E)

        Illuminates

        If the result is not as specified, replace the telltale light assembly.

    2. B357170E02

      w/ Rear No. 2 Seat:

      1. Inspect the indicator operation.

        Apply battery voltage to the telltale light assembly connector, and check that the telltale light assembly indicator illuminates.

        OK

        Measurement Condition

        Specified Condition

        Battery positive (+) → Terminal 4 (B)

        Battery negative (-) → Terminal 8 (RCID)

        Rear No. 1 center seat indicator illuminates

        Battery positive (+) → Terminal 4 (B)

        Battery negative (-) → Terminal 9 (RRID)

        Rear No. 1 seat RH indicator illuminates

        Battery positive (+) → Terminal 4 (B)

        Battery negative (-) → Terminal 16 (RLTW)

        Rear No. 2 seat LH indicator illuminates

        Battery positive (+) → Terminal 4 (B)

        Battery negative (-) → Terminal 17 (RRTW)

        Rear No. 2 seat RH indicator illuminates

        Battery positive (+) → Terminal 4 (B)

        Battery negative (-) → Terminal 18 (RLID)

        Rear No. 1 seat LH indicator illuminates
        Table 2. Text in Illustration

        *a

        Component without harness connected

        (Telltale Light Assembly)

        *b

        Rear No. 1 seat RH indicator

        *c

        Rear No. 1 center seat indicator

        *d

        Rear No. 1 seat LH indicator

        *e

        Rear No. 2 seat RH indicator

        *f

        Rear No. 2 seat LH indicator

        If the result is not as specified, replace the telltale light assembly.

      2. Inspect the illumination operation.

        Apply battery voltage to the telltale light assembly connector, and check that the telltale light assembly illuminates.

        OK

        Measurement Condition

        Specified Condition

        Battery positive (+) → Terminal 6 (ILL+)

        Battery negative (-) → Terminal 15 (E)

        Illuminates

        If the result is not as specified, replace the telltale light assembly.