DATA LIST
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / IPA/ICS/Clearance Sonar / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Main Switch | TOYOTA parking assist-sensor system switch assembly (Multi-information switch) | OFF or ON | OFF: TOYOTA parking assist-sensor system off ON: TOYOTA parking assist-sensor system on |
- |
| Initial Steering Angle Set | Status of initial steering angle setting | Not Yet or Done | Not Yet: Not completed Done: Completed |
- |
| Current Steering Angle Set | Status of current steering angle setting | Unset or Set | Unset: Not completed Set: Completed |
- |
| Clearance Sonar ECU Type | Type of clearance sonar ECU | Normal | Normal: Normal clearance sonar type | - |
| ICS SW Status | Intelligent clearance sonar system switch assembly (Multi-information switch) | OFF or ON | OFF: Intelligent clearance sonar system off ON: Intelligent clearance sonar system on |
- |
| Fr Left Sensor | Front left sensor information | Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
| Fr Right Sensor | Front right sensor information | Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
| Rr Left Sensor | Rear left sensor information | Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
| Rr Right Sensor | Rear right sensor information | Undetect, Close R, Mid Y, Mid L Y, Freeze, Open or Blink | Undetect: Not detected Close R: Detected (Close-range) [Red] Mid Y: Detected (Medium-range) [Yellow] Mid L Y: Detected (Long-range) [Yellow] Freeze: Sensor frozen Open: Open in sensor Blink: All displays blinking |
- |
| Fr Sensor Onset Range | Detection operation range (for front center sensors) | Narrow or Wide | Narrow: 600 mm (23.6 in.) Wide: 1000 mm (39.4 in.) |
Customized value displayed |
| Rr Sensor Onset Range | Detection operation range (for rear center sensors) | Narrow or Wide | Narrow: 600 mm (23.6 in.) Wide: 1500 mm (59.1 in.) |
Customized value displayed |
| Keep Sense Buzzer | Keep sense buzzer operation | Not Avail or Avail | Not Avail: Buzzer stops Avail: Buzzer sounds continuously |
Customized value displayed |
| Fr & Rr Buzzer Volume | Buzzer volume setting | L, M1, M2, M3 or H | L: Low volume M1: Medium low volume M2: Medium volume M3: Medium high volume H: High volume |
Customized value displayed |
| Sensor Condition N | Front sensor operation | Not Avail or Avail | Not Avail: Front sensors not available Avail: Front sensors available |
Customized value displayed |
| Approach Display OFF | Whether the display turns off after an obstacle is no longer detected. | Not Avail or Avail | Not Avail: Not displayed Avail: Displayed |
Customized value displayed |
| Object Not Moving 3s Buzz Vol | The volume at which the buzzer sounds when the distance between the vehicle and a detected object does not change for 3 seconds. | Keep Vol, L, M1 or M2 | Keep Vol: Keep volume L: High M1: Medium M2: Medium low |
Customized value displayed |
| Leave Buzzer Volume | The volume of the buzzer with respect to the distance between the vehicle and a detected object. | Keep Vol, L, M1 or M2 | Keep Vol: Keep volume L: High M1: Medium M2: Medium low |
Customized value displayed |
| Fr Corner Sensor Onset Range | Sets the detection operation range for the front corner sensors. | Short or Long | Short: 450 mm (17.7 in.) Long: 600 mm (23.6 in.) |
Customized value displayed |
| Rr Corner Sensor Onset Range | Sets the detection operation range for the rear corner sensors. | Short or Long | Short: 450 mm (17.7 in.) Long: 600 mm (23.6 in.) |
Customized value displayed |
| Display Mode | Display mode setting | All or Undisp | All: Display displays all sensors Undisp: Display does not display |
Customized value displayed |
| Temporary Mute Reset Speed Adjust | Temporary mute reset speed adjustment setting | System Link, 15 km/h, 20 km/h or 30 km/h | System Link: Adjustment will not be canceled due to vehicle speed 15 km/h: Adjustment will be canceled when vehicle speed reaches 15 km/h 20 km/h: Adjustment will be canceled when vehicle speed reaches 20 km/h 30 km/h: Adjustment will be canceled when vehicle speed reaches 30 km/h |
Customized value displayed |
| Temporary Mute Function | Temporary mute function setting | OFF or ON | OFF: Temporary Mute Function not operating ON: Temporary Mute Function operating |
Customized value displayed |
| IPA System | Existence of intelligent parking assist system | Without, With or Unfixed | Without: w/o Intelligent parking assist system With: w/ Intelligent parking assist system Unfixed: Unknown |
- |
| Parking Signal | Parking signal | OFF or ON | OFF: Shift lever in any position other than P ON: Shift lever in P |
- |
| Reverse Signal | Reverse signal | OFF or ON | OFF: Shift lever not in R ON: Shift lever in R |
- |
| Clearance Sonar ECU | Clearance warning ECU assembly information | Normal or Abnormal | Normal: Clearance warning ECU assembly normal Abnormal: Clearance warning ECU assembly not normal |
- |
| Rr Right Freezed History | Rear right sensor frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
- |
| Rr Left Freezed History | Rear left sensor frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
- |
| Fr Right Freezed History | Front right sensor frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
- |
| Fr Left Freezed History | Front left sensor frozen history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
- |
| Steering Wheel Location | Location of the steering wheel | Right, Left or Unfixed | Right: RH side Left: LH side Unfixed: Unknown |
- |
| HV System | Existence of hybrid system | Without, With or Unfixed | Without: w/o Hybrid system With: w/ Hybrid system Unfixed: Unknown |
- |
| Rear Right Sensor Dirty | Rear right sensor dirt history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
- |
| Rear Left Sensor Dirty | Rear left sensor dirt history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
- |
| Front Right Sensor Dirty | Front right sensor dirt history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
- |
| Front Left Sensor Dirty | Front left sensor dirt history | Not Rec or Recorded | Not Rec: No record history Recorded: Record history |
- |
| Target 1 Distance (FLC Sensor) | Distance between ultrasonic sensor and target object | Unknown, Not Detected or 0.00 to 7.65 m (0.00 to 25.09 ft.) | Unknown: Detection conditions not met Not Detected: No objects detected 0.00 to 7.65 m (0.00 to 25.09 ft.): Detected distance |
- |
| Target 1 Distance (FRC Sensor) | Distance between ultrasonic sensor and target object | Unknown, Not Detected or 0.00 to 7.65 m (0.00 to 25.09 ft.) | Unknown: Detection conditions not met Not Detected: No objects detected 0.00 to 7.65 m (0.00 to 25.09 ft.): Detected distance |
- |
| Target 1 Distance (RLC Sensor) | Distance between ultrasonic sensor and target object | Unknown, Not Detected or 0.00 to 7.65 m (0.00 to 25.09 ft.) | Unknown: Detection conditions not met Not Detected: No objects detected 0.00 to 7.65 m (0.00 to 25.09 ft.): Detected distance |
- |
| Target 1 Distance (RRC Sensor) | Distance between ultrasonic sensor and target object | Unknown, Not Detected or 0.00 to 7.65 m (0.00 to 25.09 ft.) | Unknown: Detection conditions not met Not Detected: No objects detected 0.00 to 7.65 m (0.00 to 25.09 ft.): Detected distance |
- |
| Target 1 Distance (FL Sensor) | Distance between ultrasonic sensor and target object | Unknown, Not Detected or 0.00 to 5.10 m (0.00 to 16.73 ft.) | Unknown: Detection conditions not met Not Detected: No objects detected 0.00 to 5.10 m (0.00 to 16.73 ft.): Detected distance |
- |
| Target 1 Distance (FR Sensor) | Distance between ultrasonic sensor and target object | Unknown, Not Detected or 0.00 to 5.10 m (0.00 to 16.73 ft.) | Unknown: Detection conditions not met Not Detected: No objects detected 0.00 to 5.10 m (0.00 to 16.73 ft.): Detected distance |
- |
| ICS System | Existence of intelligent clearance sonar system | Without or With | Without: w/o Intelligent clearance sonar system With: w/ Intelligent clearance sonar system |
- |
| Bumper Type | Registered bumper type | Unfixed or 1 to 127 | 1: Standard 2 to 127: Unknown Unfixed: Unknown |
- |
| # Codes | Number of stored DTCs | min.: 0, max.: 255 | Number of DTCs will be displayed | - |
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / IPA/ICS/Clearance Sonar / Active Test.
According to the display on the GTS, perform the Active Test.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Buzzer | No. 1 clearance warning buzzer | Stop or Operate | Confirm that the vehicle is stopped and the engine switch is on (IG) |