VACUUM REGULATING VALVE REMOVAL

PROCEDURE

  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE WATER GUARD PLATE LH (for LHD)

    Click hereClick hereClick here

  3. REMOVE WATER GUARD PLATE LH (for RHD)

    Click here

  4. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

    Click hereClick hereClick here

  5. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

    Click here

  6. REMOVE OUTER COWL TOP PANEL (for LHD)

    Click hereClick hereClick here

  7. REMOVE OUTER COWL TOP PANEL (for RHD)

    Click here

  8. REMOVE VACUUM REGULATING VALVE ASSEMBLY

    1. A353296C02

      *1

      No. 2 Vacuum Transmitting Hose Assembly

      *2

      No. 3 Vacuum Transmitting Hose Assembly

      Disconnect the vacuum regulating valve assembly connector.

    2. Disconnect the No. 2 vacuum transmitting hose assembly and No. 3 vacuum transmitting hose assembly from the vacuum regulating valve assembly.

    3. Remove the 2 bolts and vacuum regulating valve assembly from the No. 2 vacuum switching valve bracket.