WATER PUMP COMPONENTS
ILLUSTRATION
| *A | for 2WD | *B | for AWD |
| *1 | FRONT SUSPENSION MEMBER BRACE | *2 | NO. 1 ENGINE UNDER COVER ASSEMBLY |
| *3 | OIL PAN PROTECTOR | *4 | STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
ILLUSTRATION
| *A | for 2WD | *B | for AWD |
| *1 | AIR CLEANER ASSEMBLY LH | *2 | AIR CLEANER ASSEMBLY RH |
| *3 | INTERCOOLER RESERVE TANK ASSEMBLY | *4 | LOWER RADIATOR AIR DEFLECTOR |
| *5 | RADIATOR COVER PLATE | *6 | RADIATOR RESERVE TANK ASSEMBLY |
| *7 | RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY LH | *8 | RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY RH |
| *9 | UPPER RADIATOR SUPPORT SEAL | *10 | V-BANK COVER SUB-ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | CYLINDER BLOCK WATER DRAIN COCK PLUG | *2 | CYLINDER BLOCK WATER DRAIN COCK SUB-ASSEMBLY |
| *3 | ENGINE COOLANT TEMPERATURE SENSOR | *4 | ENGINE WATER PUMP ASSEMBLY |
| *5 | FAN AND GENERATOR V BELT | *6 | IDLER PULLEY SUB-ASSEMBLY |
| *7 | NO. 1 TURBO PRESSURE SENSOR | *8 | NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY |
| *9 | NO. 4 RADIATOR HOSE | *10 | V-RIBBED BELT TENSIONER ASSEMBLY |
| *11 | WATER HOSE | *12 | WATER INLET ASSEMBLY |
| *13 | WATER PUMP PULLEY | *14 | WATER PUMP GASKET |
| *15 | WATER INLET PIPE GASKET | *16 | CLIP |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Adhesive 1344 |  |
Do not apply lubricants to the threaded parts |
| ★ | Precoated part | - | - |