OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

   1. Install a new gasket.

   2. Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      27.5 N*m

      280 kgf*cm

      20 ft.*lbf

   3. Connect the engine oil pressure switch assembly connector.

2. INSPECT FOR OIL LEAK

   Click here

3. CHECK ENGINE OIL LEVEL

   Click here

4. INSTALL NO. 1 ENGINE COVER

   Click hereClick here

5. INSTALL NO. 1 ENGINE UNDER COVER

   Click hereClick here

6. INSTALL UPPER RADIATOR AIR GUIDE PLATE

   Click hereClick here