KINETIC DYNAMIC SUSPENSION SYSTEM, Diagnostic DTC:C1883/83

DTC Code DTC Name
C1883/83 Speed Sensor Circuit Malfunction

DESCRIPTION

The stabilizer control ECU receives the speed signal from the skid control ECU via CAN communication.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1883/83

Speed Sensor Circuit Malfunction

The stabilizer control ECU continuously receives a speed sensor malfunction signal from the skid control ECU for 1 second.

  • Brake control system

  • Stabilizer control ECU

CAUTION / NOTICE / HINT

Tip:

If DTC U0122/71 and C1883/83 are output at the same time, perform the inspection necessary for the CAN communication system first (Click here).

PROCEDURE

  1. CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM)

    1. Check for speed sensor malfunction DTCs.

      Click here

      Result

      Result

      Proceed to

      DTC is not output

      A

      DTC is output

      B

      Chassis > ABS/VSC/TRC > Trouble Codes

    B

    GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

    Click here

    A

  2. RECONFIRM DTC

    1. Clear the DTCs.

      Click here

      Chassis > KDSS > Clear DTCs

    2. Perform a road test.

    3. Check for DTCs.

      Click here

      Result

      Result

      Proceed to

      DTC is not output

      A

      DTC is output

      B

      Chassis > KDSS > Trouble Codes

    A

    USE SIMULATION METHOD TO CHECK

    Click here

    B

    REPLACE STABILIZER CONTROL ECU

    Click here