REAR NO. 2 SEAT OUTER BELT ASSEMBLY REMOVAL

PROCEDURE

1. REMOVE DECK BOARD ASSEMBLY

   Click here

2. REMOVE NO. 1 DECK BOARD

   Click here

3. REMOVE NO. 2 DECK BOARD

   Click here

4. REMOVE REAR DECK FLOOR BOX

   Click here

5. REMOVE DECK FLOOR BOX RH (for RH Side)

   Click here

6. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

7. REMOVE BACK DOOR SCUFF PLATE

   Click here

8. REMOVE REAR DOOR SCUFF PLATE

   Click here

9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP

   Click here

10. REMOVE REAR NO. 2 SEAT ASSEMBLY

    Click here

11. REMOVE NO. 1 DECK TRIM COVER

    Click here

12. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

13. REMOVE FRONT DECK SIDE TRIM COVER

    Click here

14. REMOVE NO. 2 CUP HOLDER (for LH Side)

    Click here

15. REMOVE NO. 1 CUP HOLDER (for RH Side)

    Click here

16. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (for LH Side)

    Click here

17. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

    Click here

18. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY (for Lower Side)

    
    

    1. 

       Remove the bolt and disconnect the floor end of the rear No. 2 seat outer belt assembly.

19. REMOVE DECK TRIM SIDE PANEL ASSEMBLY

    Click here

20. DISCONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY (for Upper Side)

    
    

    1. 

       Using a moulding remover, disengage the 2 claws and open the cover as shown in the illustration.

    2. 

       Loosen the bolt and disconnect the shoulder anchor of the rear No. 2 seat outer belt assembly.

21. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY

    
    

    1. 

       Remove the bolt and rear No. 2 seat outer belt assembly.