SLIDE DOOR CLOSER RELAY (w/o Power Slide Door) REMOVAL


  1. REMOVE SLIDE DOOR WINDOW GARNISH


    1. B007P9UE01

      Disengage the 4 clips and remove the slide door window garnish.

  2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. B007PWZ

      Using a "torx" socket wrench (T25), remove the 2 "torx" screws.

    2. B007T6ME01

      Disengage the 19 clips and claw, and remove the rear door trim board sub-assembly.

  3. REMOVE SLIDE DOOR SERVICE HOLE NO.1 COVER


    1. B007SIZE01

      Disengage the clamp.

    2. Disconnect the cable from the slide door lock remote control assembly.

    3. Remove the slide door service hole No.1 cover.

  4. REMOVE SLIDE DOOR CLOSER RELAY


    1. B007SJJ

      Disconnect the connector.

    2. Remove the bolt and the slide door closer relay.