HEATED STEERING WHEEL CONTROLLER(w/o Lane Departure Alert System) INSTALLATION

PROCEDURE

1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY

   
   

   1. Engage the clamp.

   2. Install the steering wheel heater control assembly to the lower steering wheel boss cover with the 2 screws.

      Torque:

      0.835 N*m  { 9 kgf*cm, 7 in.*lbf }

      Note

      If the heater thermistor comes off the lower steering wheel cover, replace the steering wheel assembly.

   3. Engage the 4 claws to install the lower steering wheel boss cover to the steering wheel assembly.

      Note

      If the heater thermistor comes off the lower steering wheel cover, replace the steering wheel assembly.

   4. Connect the connector to the steering wheel heater control assembly.

2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

   Click here