THERMOSTAT REMOVAL

PROCEDURE


  1. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  2. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

    Click here

  3. DRAIN COOLANT (for Engine)

    Click here

  4. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY


    1. A005AEAE01
      Text in Illustration
      *1 No. 2 Radiator Hose
      *2 No. 3 Water By-pass Hose

      Disconnect the No. 2 radiator hose and No. 3 water by-pass hose.

      Note


      • Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 3 water by-pass hose.

      • Do not damage the water inlet with thermostat sub-assembly.

      Tech Tips

      When disconnecting the No. 3 water by-pass hose, pinch the hose clamp, rotate the hose and pull it straight off the pipe.

    2. Type A:


      1. A005ASL

        Remove the 2 nuts, bolt and water inlet with thermostat sub-assembly.

      2. A005ABD

        Remove the gasket from the water inlet with thermostat sub-assembly.

    3. Type B:


      1. A005F1W

        Remove the 3 bolts and water inlet with thermostat sub-assembly.

      2. A005ABD

        Remove the gasket from the water inlet with thermostat sub-assembly.