SLIDING ROOF SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE SLIDING ROOF SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Power Window.

      5. Select the setting by referring to the table below.


        Power Window
        Tester Display Description Default Setting ECU
        Door Key P/W Up Function to close the power windows and sliding roof using the mechanical key OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Door Key P/W Down Function to open the power windows and sliding roof using the mechanical key OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        P/W Up W/ Transmit Function to close the power windows and sliding roof using the electrical key transmitter sub-assembly* OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit Function to open the power windows and sliding roof using the electrical key transmitter sub-assembly* OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)

        • *: w/o Canister Pump Module

      6. Enter the following menus: Customize Setting / Slide Roof.

      7. Select the setting by referring to the table below.


        Slide Roof
        Tester Display Description Default Setting ECU
        Door Key Related Operation Function to select tilt up or slide open of sliding roof key-linked function Slide 0:Slide,1:Tilt Sliding roof ECU (Sliding roof drive gear sub-assembly)
        Wireless Key Related Operation Function to select tilt up or slide open of sliding roof wireless transmitter-linked function* Slide 0:Slide,1:Tilt Sliding roof ECU (Sliding roof drive gear sub-assembly)
        Front SW Auto Operation Function to enable/disable auto operation ON 0:OFF,1:ON Sliding roof ECU (Sliding roof drive gear sub-assembly)

        • *: w/o Canister Pump Module

      8. Enter the following menus: Customize Setting / Security.

      9. Select the setting by referring to the table below.


        Security
        Tester Display Description Default Setting ECU
        Slide Roof Open Warning Function to enable or disable the sliding roof open warning ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)