ENGINE OIL COOLER REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. DRAIN ENGINE OIL

    Click here

  3. REMOVE GENERATOR ASSEMBLY

    Click here

  4. REMOVE EXHAUST MANIFOLD

    Click here

  5. REMOVE OIL FILTER SUB-ASSEMBLY

    Click here

  6. DISCONNECT VACUUM PUMP OIL INLET HOSE


    1. B0027RH

      Remove the union bolt and 2 gaskets, and then disconnect the vacuum pump oil inlet hose from the cylinder block sub-assembly.

  7. REMOVE OIL FILTER BRACKET SUB-ASSEMBLY


    1. B002890

      Remove the 11 bolts, 2 nuts, oil filter bracket sub-assembly and gasket from the cylinder block sub-assembly.

  8. REMOVE OIL COOLER ASSEMBLY


    1. Remove the 4 nuts, oil cooler assembly and 2 gaskets from the oil filter bracket sub-assembly.