TIRE PRESSURE WARNING RESET SWITCH REMOVAL

PROCEDURE

1. REMOVE FRONT DOOR SCUFF PLATE LH

   
   

   • for Double Cab: Click here

   • for Single Cab: Click here

2. REMOVE COWL SIDE TRIM BOARD LH

   Click here

3. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

   Tech Tips

   If it is necessary to remove or install the instrument cluster finish panel assembly, first remove the steering wheel. Otherwise, the vehicle interior may be damaged.

   Click here

4. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

5. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

6. REMOVE NO. 1 SWITCH HOLE BASE

   
   

   1. 

      Disconnect the connectors.

   2. Remove the No. 1 switch hole base.

      Click here

7. REMOVE TIRE PRESSURE WARNING RESET SWITCH

   
   

   1. 

      Detach the 2 claws to remove the tire pressure warning reset switch.