FRONT SUSPENSION MEMBER(for 2WD) REMOVAL

PROCEDURE

1. REMOVE ENGINE AND TRANSMISSION

   
   

   • for 8GR-FKS:

     Click here

   • for V35A-FTS:

     Click here

2. DISCONNECT FRONT FRAME CROSSMEMBER SUB-ASSEMBLY

   
   

   • for 8GR-FKS:

     Click here

   • for V35A-FTS:

     Click here

3. REMOVE FRONT ENGINE MOUNTING INSULATOR

   
   

   • for 8GR-FKS:

     Click here

   • for V35A-FTS:

     Click here

4. REMOVE NO. 2 SIDE RAIL REINFORCEMENT LH

   
   

   1. 

      Remove the 2 bolts, 2 nuts and No. 2 side rail reinforcement LH.

5. REMOVE NO. 2 SIDE RAIL REINFORCEMENT RH

   Tech Tips

   Perform the same procedure as for the LH side.

6. REMOVE RACK AND PINION POWER STEERING GEAR ASSEMBLY

   Click here

7. REMOVE FRONT STABILIZER BAR (w/o Active Stabilizer System)

   Click here

8. INSTALL FRONT ACTIVE STABILIZER CONTROL ACTUATOR ASSEMBLY (w/ Active Stabilizer System)

   Click here