REAR BUMPER REMOVAL

PROCEDURE

  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    1. B335666C06

      *a

      Screw A

      *b

      Screw B

      Remove the 2 screws labeled A.

    2. Remove the 3 screws labeled B and rear quarter panel mudguard LH.

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tip:

    Use the same procedure described for the LH side.

  3. REMOVE REAR BUMPER COVER

    1. B426422

      Remove the 6 clips.

    2. Remove the 2 screws.

    3. B426421

      w/o Mudguard

      1. Remove the screws.

        Tip:

        Use the same procedure for the other side.

    4. B439946

      w/ Mudguard

      1. Remove the screw.

        Tip:

        Use the same procedure for the other side.

    5. B426423

      Remove the 2 bolts.

    6. B426424C01
      V100155

      Protective Tape

      Put protective tape around the rear bumper cover.

      Tip:

      Use the same procedure for the other side.

    7. B426425

      Detach the 5 claws.

      Tip:

      Use the same procedure to detach the claw on the other side.

    8. B426426

      Remove the rear bumper cover as shown in the illustration.

  4. REMOVE NO. 2 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR

    B426427

    1. Remove the 2 clips and No. 2 luggage compartment service cover protector.

  5. REMOVE NO. 1 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR

    Tip:

    Use the same procedure described for the LH side.

  6. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

    1. B335671

      for Step Type:

      Remove the 6 bolts and rear bumper reinforcement sub-assembly.

    2. B335672

      w/ TOYOTA Parking Assist-sensor System:

      Remove the 6 bolts and rear bumper reinforcement sub-assembly.

    3. B335673

      for Standard Type:

      Remove the 6 bolts and rear bumper reinforcement sub-assembly.

  7. REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH

    1. B426429

      Remove the 3 bolts and rear bumper arm sub-assembly LH.

  8. REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

  9. REMOVE REAR BUMPER SIDE SUPPORT LH

    1. B426430C01

      *a

      90°

      Using a screwdriver, turn the clip 90° and remove the clip.

    2. Remove the screw.

    3. Detach the 3 claws and rear bumper side support LH.

  10. REMOVE REAR BUMPER SIDE SUPPORT RH

    Tip:

    Use the same procedure described for the LH side.

  11. REMOVE REAR BUMPER UPPER RETAINER LH

    1. B426431C01

      *a

      90°

      Using a screwdriver, turn the clip 90° and remove the clip.

    2. Detach the 2 claws and rear bumper upper retainer LH.

  12. REMOVE REAR BUMPER UPPER RETAINER RH

    Tip:

    Use the same procedure described for the LH side.