TELEMATICS TRANSCEIVER REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the telematics transceiver removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedure Effect/Inoperative when not Performed Link
Telematics transceiver Register vehicle information Emergency call service

Click here

PROCEDURE


  1. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE TELEMATICS TRANSCEIVER


    1. A002YTP

      Disconnect the 3 connectors.

    2. Disengage the clamps.

    3. Remove the 2 nuts and telematics transceiver.