ULTRASONIC SENSOR(for Rear) INSTALLATION

PROCEDURE

  1. INSTALL NO. 3 ULTRASONIC SENSOR

    1. Attach the 4 claws to install the No. 3 ultrasonic sensor as shown in the illustration.

      E266773
      Note:
      • E270085C01

        *a

        No. 3 ultrasonic sensor direction

        *b

        Keyhole direction

        No. 3 ultrasonic sensor direction is the same as the keyhole direction.

      • Do not damage the bumper when inserting the No. 3 ultrasonic sensor.

  2. INSTALL NO. 2 LUGGAGE ROOM WIRE

    Note:

    • When connecting the wire harness to the No. 3 ultrasonic sensor, hold the sensor from bumper surface.

    • After connecting the wire harness to the No. 3 ultrasonic sensor, push the sensor from the bumper surface.

    1. Attach the 6 clamps to install the No. 2 luggage room wire.

    2. w/o Rear Fog Light:

      Connect the 4 connectors.

    3. w/ Rear Fog Light:

      Connect the 6 connectors.

  3. INSTALL REAR BUMPER COVER

    Click here

  4. INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Click here

  5. INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    Click here