REVOLUTION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT)

    1. Coat a new O-ring with CVT fluid FE and install it to the transmission revolution sensor (NOUT).

    2. Install the transmission revolution sensor (NOUT) with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

    3. Connect the transmission revolution sensor connector.

  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NIN)

    1. Coat a new O-ring with CVT fluid FE and install it to the transmission revolution sensor (NIN).

    2. Install the transmission revolution sensor (NIN) with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

    3. Connect the transmission revolution sensor connector.

  3. INSTALL TRANSMISSION REVOLUTION SENSOR (NT)

    1. Coat a new O-ring with CVT fluid FE and install it to the transmission revolution sensor (NT).

    2. Install the transmission revolution sensor (NT) with the bolt.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

    3. Connect the transmission revolution sensor connector.

  4. INSTALL BATTERY BRACKET REINFORCEMENT

    Click here

  5. INSTALL FRONT BATTERY BRACKET

    Click here

  6. INSTALL BATTERY TRAY

  7. INSTALL BATTERY

  8. INSTALL BATTERY CLAMP SUB-ASSEMBLY

    Click here

  9. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  10. INSTALL AIR CLEANER CAP AND HOSE

    Click hereClick here

  11. INSTALL NO. 2 CYLINDER HEAD COVER

    Click hereClick here