NAVIGATION SYSTEM, Diagnostic DTC:B15C0 and B15C1
| DTC Code | DTC Name |
|---|---|
| B15C0 | Short in GPS Antenna |
| B15C1 | Open in GPS Antenna |
DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
DTC Code |
DTC Detection Condition |
Trouble Area |
|---|---|---|
B15C0 |
Navigation antenna error |
|
B15C1 |
Error of the power source to the navigation antenna |
WIRING DIAGRAM
CAUTION / NOTICE / HINT
Check that the wire harness is properly installed and does not have any sharp bends, pinching or loose connections (Click here).
PROCEDURE
CHECK CONNECTION OF NAVIGATION ANTENNA ASSEMBLY
Check if the navigation antenna assembly is securely connected to the No. 1 navigation antenna cord sub-assembly.
OK
Navigation antenna assembly is securely connected.
SECURELY CONNECT NAVIGATION ANTENNA ASSEMBLY
CHECK NO. 1 NAVIGATION ANTENNA CORD SUB-ASSEMBLY
-
Disconnect the antenna connector from the navigation ECU.
Disconnect the antenna connector from the navigation antenna assembly.
Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection
Condition
Specified Condition
1 - 1
Always
Below 1 Ω
1-a - 1-b
Always
Below 1 Ω
1 - Body ground
Always
10 kΩ or higher
1-a - Body ground
Always
10 kΩ or higher
Table 1. Text in Illustration *a
Front view of wire harness connector
(to Navigation Antenna Assembly)
*b
Front view of wire harness connector
(to Navigation ECU)
-
CHECK NAVIGATION ANTENNA ASSEMBLY
Replace the navigation antenna assembly with a known good one (Click here).
Check for DTCs (Click here).
OK
No DTCs are output.
END (NAVIGATION ANTENNA ASSEMBLY IS DEFECTIVE)