After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work Click here.
REMOVE DECK BOARD ASSEMBLY
REMOVE NO. 1 DECK BOARD
REMOVE NO. 2 DECK BOARD
REMOVE REAR DECK FLOOR BOX
REMOVE DECK FLOOR BOX RH
DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE AUXILIARY BATTERY
Open the auxiliary battery terminal cap.
Loosen the nut, and disconnect the positive (+) auxiliary battery cable.
Disconnect the auxiliary battery thermometer sensor connector.
Disconnect the auxiliary battery hose.
Loosen the nut, and remove the bolt.
Remove the auxiliary battery clamp.
Remove the auxiliary battery.