INTRUSION SENSOR INSTALLATION

PROCEDURE

1. INSTALL THEFT WARNING RADAR SENSOR

   1. w/ Sliding Roof:

      1. Install the theft warning radar sensor with the 2 screws.

      2. Connect the connector.

   2. w/o Sliding Roof:

      1. Install the theft warning radar sensor with the 2 screws.

      2. Connect the connector.

2. INSTALL MAP LIGHT SUB-ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick here