STEERING TORQUE SHAFT ASSEMBLY INSTALLATION


  1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  2. INSTALL STEERING SLIDING YOKE SUB-ASSEMBLY


    1. B007PP0E01

      Align the matchmarks on the steering sliding yoke sub-assembly and the steering torque shaft assembly.

    2. Temporarily tighten the bolt.

      Tech Tips

      Do not torque the bolt.

  3. INSTALL STEERING TORQUE SHAFT ASSEMBLY


    1. B007UEPE01

      Align the matchmarks on the steering torque shaft assembly and the steering bevel gear assembly.

    2. B007S9K

      Install the bolt.

      Torque:
      35 N*m  { 360 kgf*cm, 26 ft.*lbf }
    3. B007RMBE01

      Align the matchmarks on the steering torque shaft assembly and the power steering link assembly.

    4. B007UQIE01

      Install bolt (B) and tighten the 2 bolts.

      Torque:
      35 N*m  { 360 kgf*cm, 26 ft.*lbf }

  4. INSTALL ENGINE UNDER COVER NO.1