HEADLIGHT ASSEMBLY(for LED Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RH and LH sides.

  • The procedure listed below is for LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Install the clip.

    3. Engage the clamp.

    4. Install the headlight assembly with the bolt.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  2. INSTALL FRONT BUMPER SIDE SUPPORT LH


    1. Install the bolt A.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Install the front bumper side support LH with the 3 bolts B.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    3. Engage the 2 clamps to connect the wire harness.

  3. INSTALL FRONT BUMPER COVER

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  5. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT

    Click here

  6. PREPARE FOR HEADLIGHT AIMING

    Click here

  7. INSPECT HEADLIGHT AIMING

    Click here

  8. ADJUST HEADLIGHT AIMING

    Click here