CRUISE CONTROL MAIN SWITCH REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the cruise control main switch removal/installation are shown below.

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

• for Type A:

  Click here

• for Type B:

  Click here

PROCEDURE

1. REMOVE HORN BUTTON ASSEMBLY

   Click here

2. REMOVE CRUISE CONTROL MAIN SWITCH

   
   

   1. 

      Remove the 2 screws.

   2. Disconnect the connector and remove the cruise control main switch.

   3. 

      Disconnect the connector and remove the cruise control switch wire from the cruise control main switch.