ULTRASONIC SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER


    1. for Wagon:


      1. A004ROK

        Attach the claw to the rear bumper cover to install the No. 3 ultrasonic sensor retainer.

    2. for Sedan:


      1. A004QRW

        Attach the claw to the rear bumper cover to install the No. 3 ultrasonic sensor retainer.

  2. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER


    1. for Wagon:

      Tech Tips

      Use the same procedure for both No. 2 ultrasonic sensor retainers.


      1. A004QOT

        Attach the 2 claws to the rear bumper cover to install the No. 2 ultrasonic sensor retainer.

    2. for Sedan:

      Tech Tips

      Use the same procedure for both No. 2 ultrasonic sensor retainers.


      1. A004QRW

        Attach the claw to the rear bumper cover to install the No. 2 ultrasonic sensor retainer.

  3. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    1. A004ROK

      for Wagon:

      Attach the claw to the rear bumper cover to install the No. 1 ultrasonic sensor retainer.

    2. A004QBU

      for Sedan:

      Attach the claw to the rear bumper cover to install the No. 1 ultrasonic sensor retainer.

  4. INSTALL ULTRASONIC SENSOR CLIP (for Center)


    1. A004RLJ

      for Wagon:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

      Tech Tips

      Use the same procedure for the other ultrasonic sensor clip.

    2. A004O5X

      for Sedan:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

      Tech Tips

      Use the same procedure for the other ultrasonic sensor clip.

  5. INSTALL ULTRASONIC SENSOR CLIP (for RH Side and LH Side)


    1. A004RLJ

      for Wagon:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

    2. for Sedan:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

      A004NARE02
      Text in Illustration
      *A for RH Side *B for LH Side

  6. INSTALL NO. 1 ULTRASONIC SENSOR


    1. for Wagon:

      Tech Tips

      Use the same procedure for all No. 1 ultrasonic sensors.


      1. A004TKN

        Attach the No. 1 ultrasonic sensor to the ultrasonic sensor clip from the backside of the bumper. Then attach the 2 claws of the sensor to install the sensor.

      2. A004QJ9

        Connect the connector.

      3. A004MNC

        Attach the 2 clamps.

    2. for Sedan:


      1. A004UE5

        for RH Side:

        Attach the No. 1 ultrasonic sensor to the ultrasonic sensor clip from the backside of the bumper. Then attach the 2 claws of the sensor to install the sensor.

      2. A004QVJ

        except RH Side:

        Tech Tips

        Use the same procedure for all No. 1 ultrasonic sensors.

        Attach the No. 1 ultrasonic sensor to the ultrasonic sensor clip from the backside of the bumper. Then attach the 2 claws of the sensor to install the sensor.

      3. A004U1SE02
        Text in Illustration
        *1 for RHD
        *1 for LHD

        Attach the 3 clamps.

  7. INSTALL REAR BUMPER COVER (for Sedan)


    1. Install the rear bumper cover Click here.

  8. INSTALL REAR BUMPER COVER (for Wagon)


    1. Install the rear bumper cover Click here.