TRANSMISSION WIRE REMOVAL

PROCEDURE


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY


    1. A004K7G

      Remove the 20 bolts, automatic transmission oil pan sub-assembly and the automatic transmission oil pan gasket.

      Note

      Some fluid will remain in the automatic transmission oil pan sub-assembly. Remove all the bolts and carefully remove the automatic transmission oil pan sub-assembly.

  3. REMOVE TRANSMISSION OIL CLEANER MAGNET


    1. A004J3LE04
      Text in Illustration
      *1 Transmission Oil Cleaner Magnet

      Remove the 3 transmission oil cleaner magnets from the automatic transmission oil pan sub-assembly.

    2. A004HHI

      Examine the particles in the automatic transmission oil pan sub-assembly.


      1. Collect any steel chips with the removed transmission oil cleaner magnets. Carefully inspect the foreign matter and particles in the automatic transmission oil pan sub-assembly and on the transmission oil cleaner magnets to anticipate the type of wear you will find in the automatic transmission assembly.

        Steel (magnetic): bearing, gear and clutch plate wear

        Brass (non-magnetic): bush wear

  4. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


    1. A004J4I

      Remove the 4 bolts and the valve body oil strainer assembly.

      Note

      Be careful as some fluid will come out of the valve body oil strainer assembly.

    2. A004JDGE01
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the valve body oil strainer assembly.

  5. DISCONNECT TRANSMISSION WIRE


    1. A004J44

      Remove the bolt and the temperature sensor clamp.

    2. Separate the ATF temperature sensor.

    3. A004K3F

      Remove the bolt and the valve body wire harness clamp.

    4. Disengage the wire harness clamp.

    5. A004KUS

      Disconnect the 9 solenoid valve connectors.

  6. REMOVE TRANSMISSION WIRE


    1. A004KZ2

      Disconnect the transmission wire connector.

      Tech Tips

      Disengage the claw, press down the lever, and disconnect the transmission wire connector.

    2. A004H63

      Remove the bolt and pull out the transmission wire.

    3. A004J0GE12
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the transmission wire.