OCCUPANT CLASSIFICATION ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing.

    Click here

    Note


    • After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

      Click here

    • When removing front seat assembly RH, perform zero point calibration and sensitivity check.

      Click here

    • When replacing the occupant detection ECU, perform zero point calibration and sensitivity check.

      Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  4. REMOVE OCCUPANT DETECTION ECU


    1. B008J6I

      Disconnect the 2 connectors.

    2. B008JKY

      Detach the claw and remove the occupant detection ECU.