REAR PLANETARY GEAR DISASSEMBLY


  1. REMOVE OUTPUT SHAFT

    A01E10VE01

  2. REMOVE PLANETARY OUTPUT SHAFT OIL SEAL RING

    A01E31JE01

  3. REMOVE REAR PLANETARY RING GEAR

    A01E0EDE01

  4. INSPECT NO. 2 ONE-WAY CLUTCH

    A01DX8JE01

    1. Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race can be turned freely counterclockwise and locks when turned clockwise.

  5. REMOVE NO. 2 ONE-WAY CLUTCH

    A01DWFWE01

    1. Remove the inner race from the planetary gear.

    2. A01E2N7E01

      Using a screwdriver, pry out the snap ring.

    3. A01DZFHE01

      Remove the one-way clutch with the retainers from the planetary gear.

  6. REMOVE NO. 2 PLANETARY CARRIER THRUST WASHER

    A01DYIAE01

  7. REMOVE NO. 1 PLANETARY CARRIER THRUST WASHER

    A01DVTOE01

  8. REMOVE REAR PLANETARY FLANGE THRUST NEEDLE ROLLER BEARING

    A01DZPSE01

    1. Remove the 2 races and bearing from the planetary ring gear.

  9. REMOVE REAR PLANETARY RING GEAR FLANGE

    A01E2WJE01

    1. Using a screwdriver, pry out the snap ring.

    2. A01E2WDE01

      Remove the ring gear flange.

  10. INSPECT PLANETARY PINION GEAR THRUST CLEARANCE

    A01E02CE01

    1. Using a feeler gauge, measure the thrust clearance.

      Standard clearance
      0.20 to 0.60 mm (0.0079 to 0.0236 in.)
      Maximum clearance
      0.65 mm (0.0256 in.)

      If the clearance is greater than the maximum, replace the planetary gear.