CLUTCH RELEASE CYLINDER(for Diesel) REASSEMBLY

PROCEDURE

  1. INSTALL RELEASE CYLINDER BLEEDER PLUG

    1. Install the release cylinder plug to the release cylinder body.

      8.3 N*m

      85 kgf*cm

      73 in.*lbf

  2. INSTALL CLUTCH RELEASE CYLINDER KIT

    1. Install the bleeder plug cap on the release cylinder bleeder plug.

    2. Install a new compression spring on the release cylinder body.

    3. C128485

      Coat the parts with lithium soap base glycol grease to the areas shown in the illustration.

    4. Install a new release cylinder piston on the release cylinder body.

      Note:

      Be careful not to damage the inside of the release cylinder body.

    5. Install the No. 1 clutch release cylinder push rod on the release cylinder body.

    6. Install the clutch release cylinder boot on the release cylinder body.