CRUISE CONTROL SYSTEM(except 1WW) ROAD TEST
INSPECT SET SWITCH
-
Push the cruise control switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
-
Press the cruise control switch to -SET.
After releasing the switch, check that the vehicle cruises at the desired speed.
-
INSPECT "+" SWITCH
-
Push the cruise control switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
-
Press the cruise control switch to -SET.
-
Check that the vehicle speed increases while the cruise control switch is pushed to +RES, and that the vehicle cruises at the set speed when the cruise control switch is released.
Momentarily press the cruise control switch upward to +RES and immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (Tap-up function).
-
INSPECT "-" SWITCH
-
Push the cruise control switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
-
Press the cruise control switch to -SET.
Check that the vehicle speed decreases while the cruise control switch is pushed down to -SET, and that the vehicle cruises at the set speed when the cruise control switch is released.
Momentarily press the cruise control switch downward to -SET and immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (Tap-down function).
-
INSPECT CANCEL FUNCTION (CANCEL SWITCH)
-
Push the cruise control switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
-
Press the cruise control switch to -SET.
When performing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
Depressing the brake pedal
-
Pushing the cruise control switch off
-
Pulling the cruise control switch to CANCEL
Driving the vehicle while the vehicle stability control system is operating
for CVT:
Moving the shift lever from D to N, or selecting 3rd, 2nd or 1st range with the shift lever in M
for Automatic Transaxle:
Moving the shift lever from D to N or M
for Manual Transaxle:
Depressing the clutch pedal
-
INSPECT RES (RESUME) SWITCH
-
Push the cruise control switch on.
Drive the vehicle at a desired speed (between 40 km/h and 200 km/h [25 mph and 125 mph]).
-
Press the cruise control switch to -SET.
Cancel the cruise control system by performing one of the following.
Depressing the brake pedal
-
Pulling the cruise control switch to CANCEL
Driving the vehicle while the vehicle stability control system is operating
for CVT:
Moving the shift lever from D to N, or selecting 3rd, 2nd or 1st range with the shift lever in M
for Automatic Transaxle:
Moving the shift lever from D to N or M
for Manual Transaxle:
Depressing the clutch pedal
-
After the cruise control switch is pushed up to +RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed that was set before the cancellation.
-