DIESEL THROTTLE BODY (w/o EGR Cooler) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    A01E04B

    1. Remove the 3 bolts, 2 nuts and engine cover.

  3. REMOVE CHARGE AIR COOLER ASSEMBLY WITH INTAKE AIR CONNECTOR


    1. A01DXVU

      Disconnect the vacuum hose from the manifold absolute pressure sensor.

    2. Disconnect the IAT sensor connector and manifold absolute diesel pressure sensor connector.

    3. A01E2UO

      Loosen the 2 hose clamps of the No. 1 air hose.

    4. A01DXAO

      Loosen the 2 hose clamps of the No. 2 air hose.

    5. A01DWHY

      Remove the 4 bolts and CAC.

  4. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A01DZU2

      Disconnect the 2 connectors.

    2. A01E2KU

      Remove the 2 bolts, 2 nuts, throttle body and gasket.