CONDENSER(for 8GR-FKS) REASSEMBLY

PROCEDURE


  1. INSTALL COOLER DRYER


    1. B006B89C01
      *a Modulator

      Using needle-nose pliers, install a new cooler dryer to the modulator.

    2. B006CC4

      Sufficiently apply compressor oil to the 3 new O-rings and the fitting surface of a new cap.

      Compressor Oil
      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

      Note

      Keep the O-ring and O-ring fitting surface free of foreign matter.

    3. B006D45C01
      *a Modulator

      Using a 14 mm straight hexagon socket wrench, install the cap to the modulator.

      Note

      Make sure not to cut the O-ring while installing it. (Cut O-rings cannot be installed)

      Torque:
      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }