REAR DOOR WINDOW FRAME MOULDING INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR DOOR FRONT WINDOW FRAME MOULDING

   Tip:

   When installing a new rear door front window frame moulding, heat the vehicle body and rear door front window frame moulding using a heat light.

   Table 1. Heating Temperature

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)
   Rear Door Front Window Frame Moulding	20 to 30°C (68 to 86°F)

   Note:

   Do not heat the vehicle body or rear door front window frame moulding excessively.

   1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

   2. Install a new rear door front window frame moulding.

      1. Using a heat light, heat the vehicle body and rear door front window frame moulding.

      2. Remove the release paper from the rear door front window frame moulding.

         Tip:

         After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. 

         Double-sided Tape

         Engage the clip and guide, and install the rear door front window frame moulding.

2. INSTALL REAR DOOR BELT MOULDING ASSEMBLY

   for Hatchback, Wagon:Click here

   for Sedan:Click hereClick here