CONDENSER(for 1UR-FE) REMOVAL

PROCEDURE

  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. DRAIN ENGINE COOLANT

    1. Drain the engine coolant (Click here).

  3. REMOVE RADIATOR ASSEMBLY

    1. Remove the radiator assembly (Click here).

  4. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

    1. E205578

      Remove the bolt and disconnect the discharge hose from the cooler condenser.

      Note:

      • When removing the bolt, do not allow any tools to contact the pipe.

      • When removing the bolt, hold a part of the pipe near the connector.

    2. Remove the O-ring from the discharge hose.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  5. DISCONNECT AIR CONDITIONING TUBE ASSEMBLY

    1. E247315

      Remove the bolt and disconnect the air conditioning tube assembly from the cooler condenser.

      Note:

      • When removing the bolt, do not allow any tools to contact the pipe.

      • When removing the bolt, hold a part of the pipe near the connector.

    2. Remove the O-ring from the air conditioning tube assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  6. DISCONNECT NO. 1 COOLER CONDENSER BRACKET

    1. E247353

      Remove the bolt and disconnect the No. 1 cooler condenser bracket.

  7. DISCONNECT NO. 2 COOLER CONDENSER BRACKET

    1. E199360

      Remove the bolt and disconnect the No. 2 cooler condenser bracket.

  8. REMOVE COOLER CONDENSER ASSEMBLY

    1. E204851

      Remove the 3 bolts and cooler condenser as shown in the illustration.

  9. REMOVE COOLER DRYER

    1. I030086

      Using a 14 mm socket hexagon wrench, remove the cap from the modulator.

    2. I032475

      Remove the O-ring from the cap.

    3. E050386

      Using pliers, remove the cooler dryer.