REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS

K115691

  • With the floor side rail front panel cut and join replacement sections removed.

  1. REMOVAL

    Symbol Meaning
    K108818

    Remove Weld Points
    K108827

    Cut and Join Location

    1. Carefully cut the rear floor side member sub-assembly so not to damage A.

      K116180C01

      *A

      LH

      -

      -

      *1

      REAR FLOOR SIDE MEMBER SUB-ASSEMBLY

      -

      -

      *a

      85 mm (3.35 in.)

      -

      -

    2. Carefully cut the rear floor side member sub-assembly so not to damage A.

      K116181C01

      *A

      RH

      -

      -

      *1

      REAR FLOOR SIDE MEMBER SUB-ASSEMBLY

      -

      -

      *a

      85 mm (3.35 in.)

      -

      -

  2. INSTALLATION

    Symbol Meaning
    K108818

    Remove Weld Points
    K108823

    Plug Weld
    K108827

    Cut and Join Location
    K108831

    Butt Weld

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. If the entire supply part is not needed, remove the part of the supply part that is needed.

      K116182C01

      *A

      LH

      -

      -

      *1

      REAR FLOOR SIDE MEMBER SUB-ASSEMBLY

      -

      -

      *a

      85 mm (3.35 in.)

      -

      -
      K116183C01

      *A

      LH

      -

      -

    3. If the entire supply part is not needed, remove the part of the supply part that is needed.

      K116184C01

      *A

      RH

      -

      -

      *1

      REAR FLOOR SIDE MEMBER SUB-ASSEMBLY

      -

      -

      *a

      85 mm (3.35 in.)

      -

      -
      K116185C01

      *A

      RH

      -

      -

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.