REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE MANUAL TRANSAXLE ASSEMBLY


    1. Remove the manual transaxle Click here.

  4. REMOVE CLUTCH COVER ASSEMBLY

    Click here

  5. REMOVE CLUTCH DISC ASSEMBLY

    Click here

  6. REMOVE FLYWHEEL SUB-ASSEMBLY

    Click here

  7. REMOVE REAR CRANKSHAFT OIL SEAL


    1. A004N1PE01
      *1 Cut Position

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver, pry out the oil seal.

      Note

      Be careful not to damage the crankshaft.