REVOLUTION SENSOR REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

4. REMOVE NO. 2 CYLINDER HEAD COVER

   Click here

5. REMOVE AIR CLEANER CAP AND HOSE

   Click here

6. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   
   

   1. Remove the air cleaner filter element sub-assembly from the air cleaner case sub-assembly.

7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

   Click here

8. REMOVE BATTERY CLAMP SUB-ASSEMBLY

   Click here

9. REMOVE BATTERY

10. REMOVE BATTERY TRAY

11. DISCONNECT RADIATOR HOSE SUB-ASSEMBLY

    Click here

12. REMOVE BATTERY CARRIER ASSEMBLY

    Click here

13. REMOVE BATTERY BRACKET REINFORCEMENT

    Click here

14. REMOVE TRANSMISSION REVOLUTION SENSOR (NIN)

    

    
    

    1. Disconnect the connector.

    2. Remove the bolt and transmission revolution sensor (NIN) from the continuously variable transaxle assembly.

    3. Remove the O-ring from the transmission revolution sensor (NIN).

15. REMOVE TRANSMISSION REVOLUTION SENSOR (NOUT)

    

    
    

    1. Disconnect the connector.

    2. Remove the bolt and transmission revolution sensor (NOUT) from the continuously variable transaxle assembly.

    3. Remove the O-ring from the transmission revolution sensor (NOUT).

16. REMOVE TRANSMISSION REVOLUTION SENSOR (NT)

    

    
    

    1. Disconnect the connector.

    2. Remove the bolt and transmission revolution sensor (NT) from the continuously variable transaxle assembly.

    3. Remove the O-ring from the transmission revolution sensor (NT).