ELECTRICAL KEY OSCILLATOR(for Front Floor) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the RHD and LHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. B006C9N

      Attach the clamp and install the No. 1 indoor electrical key antenna assembly.

      Note

      Do not use parts that have been dropped or subjected to any strong impact.

    2. Connect the connector.

  2. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  5. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  6. INSPECT SRS WARNING LIGHT

    Click here