RADIO RECEIVER INSTALLATION

PROCEDURE

  1. INSTALL NO. 2 RADIO BRACKET

    1. Attach the 2 guides to install the No. 2 radio bracket.

    2. Install the screw.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

  2. INSTALL NO. 1 RADIO BRACKET

    1. Attach the 2 guides to install the No. 1 radio bracket.

    2. Install the screw.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

  3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    1. Connect each connector.

    2. Insert the multi-media module receiver assembly to attach the 6 clips and guide on its backside.

      B356889C01

      *A

      w/o Navigation System

      *B

      w/ Navigation System
      Note:

      When inserting the receiver, do not press theknobs on it.

    3. Install the multi-media module receiver assembly with the 4 bolts.

      12.5 N*m

      127 kgf*cm

      9 ft.*lbf

  4. INSTALL FRONT CONSOLE UPPER PANEL GARNISH

    Click here

  5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick here).