REAR SEAT OUTER BELT ASSEMBLY(for Wagon) INSTALLATION
CAUTION / NOTICE / HINT
Use the same procedure for the RH side and LH side.
The procedure described below is for the LH side.
PROCEDURE
INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY
INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY
Engage the guide.
Install the rear seat 3 point type outer belt assembly with the nut.
42 N*m
428 kgf*cm
31 ft.*lbf
Connect the floor anchor of the rear seat 3 point type outer belt assembly with the bolt.
42 N*m
428 kgf*cm
31 ft.*lbf
Check if the ELR locks.
Note:The check should be performed with the rear seat 3 point type outer belt assembly installed.
With the rear seat 3 point type outer belt assembly installed, check that the belt locks when it is pulled out quickly.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY
INSTALL RECLINING REMOTE CONTROL BEZEL
INSTALL NO. 2 DECK SIDE TRIM HOOK
INSTALL REAR SEAT SIDE GARNISH
INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
INSTALL REAR DOOR SCUFF PLATE
INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)
INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)
CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY
CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for RH Side)
INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)
INSTALL REAR SEAT HEADREST ASSEMBLY
INSTALL REAR SEAT CUSHION ASSEMBLY
INSTALL REAR DECK TRIM COVER
INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)
INSTALL TONNEAU COVER ASSEMBLY
INSTALL DECK FLOOR BOX RH (for RH Side)
INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY (for RH Side)
w/ Deck Board:
INSTALL DECK FLOOR BOX LH (for LH Side)
w/o Woofer:
INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (for LH Side)
w/ Deck Board:
INSTALL REAR FLOOR MAT ASSEMBLY
INSTALL FRONT DECK FLOOR BOX (w/ Deck Board)
INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)
INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)