MANUAL TRANSAXLE OIL ON-VEHICLE INSPECTION

PROCEDURE

  1. REMOVE NO. 1 ENGINE UNDER COVER (for 1ZR-FAE)

  2. REMOVE NO. 1 ENGINE UNDER COVER (for 1ZR-FE)

    Click here

  3. REMOVE REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

    Click here

  4. REMOVE REAR ENGINE UNDER COVER LH (for 1ZR-FE)

    Click here

  5. INSPECT MANUAL TRANSAXLE OIL

    1. C275730C01

      *1

      Manual Transmission Filler Plug

      Remove the manual transmission filler plug and gasket.

    2. D025304C02

      *a

      0 to 5 mm

      Check that the oil level is between 0 and 5 mm (0.197 in.) from the bottom lip of the manual transmission filler plug opening.

      Note:

      An excessively large or small amount of manual transaxle oil may cause problems.

    3. Check for oil leakage when the oil level is low.

    4. C275730C01

      *1

      Manual Transmission Filler Plug

      Install a new gasket and the manual transmission filler plug.

      39.2 N*m

      400 kgf*cm

      29 ft.*lbf

  6. INSTALL REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

    Click here

  7. INSTALL REAR ENGINE UNDER COVER LH (for 1ZR-FE)

    Click here

  8. INSTALL NO. 1 ENGINE UNDER COVER (for 1ZR-FAE)

  9. INSTALL NO. 1 ENGINE UNDER COVER (for 1ZR-FE)

    Click here