HIGH INTENSITY DISCHARGE HEADLIGHT BULB INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL DISCHARGE HEADLIGHT BULB


    1. Install the discharge headlight bulb.

      Note

      Do not touch the bulb glass.

    2. A004JDUE02

      Lock the set spring as indicated by the arrow in the order shown in the illustration.

    3. A004JXI

      Turn the headlight light control ECU sub-assembly socket in the direction indicated by the arrow in the illustration to connect the headlight light control ECU sub-assembly socket.

  2. INSTALL HEADLIGHT COVER


    1. A004HDF

      Turn the headlight cover in the direction indicated by the arrow in the illustration to install it.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    6.0 N*m  { 61 kgf*cm, 53 in.*lbf }