FRONT STABILIZER BAR(for AWD) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. AIR SUSPENSION CONTROL PROHIBITED (w/ Air Suspension)

   Click here

2. REMOVE FRONT WHEEL

   Click here

3. REMOVE NO.1 ENGINE UNDER COVER ASSEMBLY

   Click here

4. REMOVE NO.2 ENGINE UNDER COVER ASSEMBLY

   Click here

5. REMOVE FRONT SUSPENSION MEMBER BRACE

   Click here

6. REMOVE STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY

   Click here

7. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

   
   

   1. 

      Remove the 2 nuts and front stabilizer link assembly LH from the lower No. 2 suspension arm assembly LH and front stabilizer bar.

      Tech Tips

      If the ball joint turns together with the nut, use a 8 mm hexagon wrench to hold the stud bolt.

8. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

   Tech Tips

   Perform the same procedure as for the LH side.

9. REMOVE FRONT STABILIZER BAR

   
   

   1. 

      Remove the 4 bolts and front stabilizer bar.

      Tech Tips

      The stabilizer bracket and bush are built onto the stabilizer bar. If the bracket and/or bush detach from the bar, replace the bar.