PURGE VALVE INSTALLATION

PROCEDURE

  1. INSTALL PURGE VALVE (PURGE VSV)

    1. Install the purge valve (purge VSV) with the screw.

      3.4 N*m

      35 kgf*cm

      30 in.*lbf

    2. A296075C01

      *a

      1 to 5 mm

      *b

      135°

      *c

      Upper Side

      *d

      Front Side

      Connect the purge valve (purge VSV) connector to the purge valve (purge VSV).

    3. Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV).

    4. Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV) and slide the clip to secure it.

      Tip:

      Engage the clip within shown in the illustration.

  2. INSTALL NO. 2 CYLINDER HEAD COVER

    Click hereClick hereClick hereClick here